Panda eating bamboo, black and white
Print Profile(2)
Description
Print with 100% infill, 0.08mm layer height, 0.16mm base layer
Model size is 200x200mm
You can print at higher layer heights below the minimum depth of 0.48mm. Maximum depth is 2.2mm, actual depth is 2.2mm
Filaments used:
PLA Bambu Lab Basic Black, Transmission distance: 0.6
PLA Bambu Lab Basic White, Transmission distance: 5
Color change instructions:
Start with black
Switch to white at layer 12 (1.04mm)
Switch to black at layer 13 (1.12mm)
Switch to white at layer 20 (1.68mm).
After printing, simply add some color to the bamboo
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)