Gilba

cover

IMG_0211.jpeg

IMG_0216.jpeg

IMG_0212.jpeg

plate_1.png

Screenshot 2024-12-09 at 04.17.33.png

P1S - 0.2mm layer, 2 walls, 10% infill

2024-12-08_8715d083a905e8.jpeg

0.24mm layer, 2 walls, 10% infill

Screenshot 2024-12-09 at 04.29.36.png

Here is the A1 mini size! I'm not sure how the small details are going to come out, so please let me know how it goes! :)

A1 mini size

Screenshot 2024-12-09 at 15.10.02.png

Here is the profile with 0.2 mm nozzle for the letters to be of higher quality. If you have an A1 mini and a 0.2 mm nozzle, I would recommend this print profile :) It is going to take a lot longer to print, but the outcome will be worth it!&nbsp;

0.2 mm nozzle A1 mini size

user_340552603

IMG_20241216_220608.jpg

IMG_20241216_220850.jpg

2025 F1 CalendarHigh Quality X1C&nbsp; 6 hours 0.16 layer height, Seam adjusted&nbsp;Should also work with P1P, P1S AMS combo

0.16mm layer, 2 walls, 10% infill

Glitch24

F1Calendar2025.jpg

This is an alteration of the P1S profile to enable users without AMS to achieve the same 3 color print. &nbsp;I added three G-code pauses allowing you to begin the print with Black, switch to Red during pause 1, White during pause 2, and back to Red during pause 3. &nbsp;I reduced the height of the F1 logo in the same way the designer had for the “faster profile,” allowing for it to be done in the same color and at the same time as the locations, removing the need for a 4th pause and swap later. &nbsp;Coming from the P1S, the A-series crowd might be able to use this after scaling it to your bed if you adjust your feeds/speeds.

X1/P1 - 3 Color w/ No AMS, 0.2mm layer

Ivan

F1-2025.jpg

Diff.JPEG

This model checked only with custom gcode. Custom gcode can't be printed from Bambu Handy In this model I changed some settings and also change gcode.Settings: - Changed infill type- Speed was lowered for some types like external perimeter.&nbsp;Gcode changes:Warning!!! Please note that all changes below are made at your own risk.&nbsp;Be careful, and also create backups of everything you change. Deleted the part of the purge line (nozzle load line) that intersected with the model I changed start block of gcode in printer start profile and removed line turn. Updated Gcode you can find below. This code taken from my P1S and must be changed only on P1S directly with 0.4 nozzle. Also check date of gcode on task start. If yours doesn't match my, you should be afraid.Most likely, the printer firmware has been updated and these changes may harm your printer ``` ;===== machine: P1S ======================== ;===== date: 20231107 ===================== ``` ```gcode ;===== nozzle load line ===============================M975 S1G90M83T1000G1 X18.0 Y1.0 Z0.8 F18000;Move to start positionM109 S{nozzle_temperature_initial_layer[initial_extruder]}G1 Z0.2G0 E2 F300G0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60} ; Horizontal line externalG0 Y1.5 ; Move to position of internal lineG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60} ; Horizontal line internalM400 ```

H Quality 0.4 nozzle, 0.2 l, important to check description

thespecialone

IMG_20241221_105602_HDR.jpg

fits perfectly, with an 80° angle&nbsp;

0.16mm layer, 2 walls, 15% infill

WhatsApp Image 2025-01-29 at 12.19.28 AM.jpeg

The default Line width of the 0.4 nozzle struggles with the track name text. I tried multiple settings and found 0.35mm to have the best result. Also the top surface has been changed to Hilbert&#39;s curve with line width of 0.8mm for reduced print time. Filament Order Start with Black Layer 5: Swap to red Layer 8: Swap to White Layer 12: Swap back to red for the rest

A1 Mini Size, 0.4 Nozzle, Almost Perfect Text, AMS Optional

Paolo Ubbiali

IMG_7227.JPG

IMG_7230.JPG

IMG_7229.JPG

IMG_7228.JPG

Hilbert Curve Top surface

Zara

IMG_1560.jpeg

IMG_1559.jpeg

The full-sized F1 calendar model for a 0.2mm nozzle for higher quality writing and print

0.2mm F1 fill sized calendar

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

The <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1521189-2026-formula-1-calendar#profileId-1594145">2026 F1 calendar </a>is now available! Here&#39;s the link to it: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1521189-2026-formula-1-calendar#profileId-1594145">https://makerworld.com/en/models/1521189-2026-formula-1-calendar#profileId-1594145</a>&nbsp;If you want to sell my models you should subscribe to my Patreon! It is only $12 per month, the link to it is in my profile bio :)&nbsp;I just uploaded a <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1076877#profileId-1067874">stand</a> for those of you who don&#39;t want to hang it. Here&#39;s the link to it: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1076877#profileId-1067874">https://makerworld.com/en/models/1076877#profileId-1067874</a>&nbsp;Here goes the 2025 F1 calendar!  This Formula 1 calendar is a detailed 3D design showcasing the complete season schedule, including updated tracks and locations. Designed for 3D printing in PLA, it’s lightweight, and easy to produce.&nbsp;I printed it with all matte filament, just so you know! Please share a picture in a comment if you print it! I would love to see how it turns out! Also please consider boosting the design, it helps a lot :)  <boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please consider boosting! It helps a lot :)</boostcontent></boostme>

2025 Formula 1 Calendar

ASIA

Print Profile(11)

Description

Comment & Rating (2419)

License

Related Models