Clock with custom face

A small clock with custom face.

This clock is made to be used with the bamb lab Clock Components Kit 011.

The assembly is easy, you just have the base and the legs, which slide in a pocket on the base.

The faces can be attached by double sided tape, by glue, or just by the nut in the Clock Components Kit 011.

- You can use one of the faces i designed or easily make your own.

- You can design a 3d printed face.

- You can design a printed on paper face if you want more complex colors.

- You can even draw your clock face by hand.

the Clock face pocket can be made in one color and then paint in the pockets if you don't have multiple colors.

the Clock face loft can be printed with 2 colors.

the Clock face hole can be printed in one color but have a diffrent color for the Clock base so the numbers show through.

the Clock face print on paper is a version that you print on A4 paper, cut it out and sitick it on the Clock base. (what i did)

If you want to make your own face for the clock you need to follow this dimensions:

• 130 mm outer circle.
• 10 mm inner circle for the Clock Components Kit 011 to pass through.
• 1 mm or thickness or less (or you cand go more thickness on the outside but in the middle a circle of 20 mm at 1mm thickness is required to be able to tighten the nut) .