RC Crawler Park - See Saw - 1:18 & 1:24

Inspired by the models created by fisherbrad922 I have created my own set of indoor RC Crawler Park Obstacles to complement his set.
These are all original creations modeled by myself and I am making them available here totally free for all to enjoy!

My motivation for creating these is to provide a challenging course for my autistic son who loves his RC crawlers but would not want them to get dirty outside, this way he can keep them just the way he likes them!

This obstacle is an See Saw (Teeter Totter) occupying three tile spaces

Two blank tile plates will be needed from fisherbrad922's files

Hardware:

To assemble you will need a pivot rod of approx 8.5mm diameter x 178mm minimum length, I used a hollow section of “net curtain” rod.

You will also need 16x M3 x 12mm long countersunk screws (AA087) and nuts (AB005).

Optional:

The small damper plates grip on to the pivot rod to slow the ramps fall. The damper is screwed in to the main body with some M3 screws 10 to 15mm long (AA173)

For all of these models I am using 15% gyroid infill for the base for strength. I found lower infill bases shattered when removing from the build plate so I dont recommend trying it. My 3MF files are setup with a colour change at a preset height or you can print all one colour if you prefer.