Longhair Persian Cat (Delicate Fur Texture)

Longhair Persian Cat (Delicate Fur Texture)

• A pet sculpture of a longhair Persian cat, with exquisitely carved fur texture and lifelike expression and pose!
• Initial configuration outline dimensions 85X103.2X96.9mm, scalable to your needs. You can also paint or multi-color print it yourself
• Supports are easy to remove, but require care, default 0.16 layer height, variable layer height is enabled in the configuration, 100% speed printing is recommended
• If the overhang quality is unsatisfactory, pay attention to heat dissipation! Also, pay attention to flow calibration and drying of the filament for better print quality!
• Welcome everyone to print and share your results! For any issues, please leave a comment and we can discuss and solve them together!

3D Printing Tips and Preparation Precautions

(Most models released by creators have been tested and can be adapted to all models. In many cases, if printing problems occur, you need to check if your printer and filament are working properly. This is a skill that you need to learn when playing 3D printing, and you can also actively discuss any problems in the comments section. This is also the meaning of building such a community)

Some precautions are explained below, for more questions you can ask customer service or check the Bambu Wiki, you can learn a lot from itPrint Quality and Troubleshooting | Bambu Lab Wiki

• Ensure that the build plate is clean, and it is recommended to clean the build plate regularly!Oil residue on your hands after touching the build plate will significantly reduce adhesion. At the same time, debris from previous prints and small residues of printed parts will also affect the quality of the first layer, thus reducing the yield.
• Pay attention to filament drying, which will greatly affect your printing quality and printing experience! Filaments will inevitably become damp after being left for a long time. If stringing occurs, it is recommended to ask the manufacturer for drying parameters to dry the filament. At the same time,most manufacturers' filaments are not dried during factory production, so our newly opened filaments are still a little damp, and it is also recommended to dry them before use.
• When using filament from a new manufacturer, it is recommended to perform filament flow calibration immediately and modify the calibration coefficient, which will greatly affect your printing quality, and is also a necessary process to allow the new filament to adapt to your printer.
• If you encounter problems such as sudden deterioration of print quality and low yield, check if the nozzle is clogged, and you can also try recalibrating the printer.
• Print at the recommended printing speed in the model instructions. Overhang quality is directly related to printing speed, the appropriate speed (too fast or too slow is not good) allows the material to have more time to cool and form during deposition.
• Set the bed and nozzle temperature reasonably according to different materials.Too high or too low temperatures will cause warping, layer deformation or adhesion problems, thus affecting the printing quality and success rate.