Espresso Tamper and Knock Box Station

Personal Design, Commercial Use Strictly Prohibited, Legal Action Will Be Taken for Unauthorized Commercial Use

Compatible with Most 58mm Commercial-Sized Portafilters. If Incompatible (e.g., 54mm), Simply Scale the Model Proportionally

Design Overview:

1: Integrated storage for the distributor, tamper, and cleaning brush

2: The tamping handle is positioned below for tamping

3: After distributing and tamping, use the brush to clean the top surface. Numerous holes allow for direct sweeping of grounds into the lower knock box without opening it, ensuring a clean workspace. Side panels safeguard your countertop, resolving a persistent cleaning challenge (a long-standing personal frustration, finally solved!)

4: After extraction, gently open the drawer. A light tap suffices; excessive force is unnecessary

5: Top holes facilitate the release of moisture from the puck, preventing mold

6: Rear holes mitigate air pressure issues that might prevent drawer closure, also optimizing material usage during printing

7: The TPU tamper sleeve is optional. Printing and attaching it enhances the tamping experience

8: Affix the nameplate using adhesive to the drawer lid. This avoids vertically printing, which consumes excessive material and time for color changes. Use a nameplate generator for customization

9: For optimal aesthetics, employ a matte finish material

Please like and comment if you enjoy this design!