Spinning Jinx and Ekko rose necklace - Arcane
Print Profile(2)
Description
70mm diameter - Spins
AMS used but optional, can find both print print profiles.
IMPORTANT: the top/bottom surface patter is important for the finished result, I found that Archimedean Chords are a good fit. The quality can be improved by using a smaller nozzle.
The assembly is simple and no additional material is required.
- Attach the two caps, optional superglue
- Insert the two “neckdecor” parts inside the inner ring: there is a slight interference so no glue necessary
- Optional: if the inner ring is not rotating properly, unstuck it manually by removing it from the outer ring, sand lightly and you're good to go!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (36)