Victory Falcon One, from Ultraman Tiga, Ready-to-Print 3D Model

This is a Victory Falcon One model I designed.

The original design is from the Ultraman Tiga special effects television series.

My recreation is quite faithful to the original. It’s modeled according to the official design specifications, though unavoidable discrepancies exist due to some unclear markings and impossible surfaces. Key aspects, however, are exceptionally well-reproduced; simplicity and authenticity are combined.

I dislike assembling 3D-printed models. In my experience, 3D printing precision and other factors make assembly designs difficult, resulting in inconsistent quality.

Therefore, I strive to design models that are ideally ready-to-print, hence the creation of this model.

Support Removal Instructions

Step 1

Step 2

Step 3

Step 4

Step 5

The remaining smaller pieces are relatively easy to remove.

Special Step

Precautions

Supports may be somewhat difficult to remove and require patience. This is unavoidable to ensure print quality. Your understanding is appreciated.

When removing supports, take care not to accidentally break off the tail wings. With care, it’s not too difficult.

I uploaded a version 10 hours ago; I noticed three downloads but subsequently discovered an error in the uploaded configuration and immediately removed it. To those three individuals, I sincerely apologize.

If you enjoy this model, please give me a small like, and boosting me would be even better. I will develop more interesting and refined models.

As a novice 3D printing enthusiast, your support brings me closer to my dream of joining Bambu Lab (a lofty ambition).