Print Profile(2)
Bill of Materials
Description
Tealight candle holder decoration with heart.
A simple tealight candle holder print for the home.
The print comprises two parts that unite to form a central heart.
The model has also been tested with real flame candles: it can also be printed in PLA.
You have two parts of differing heights divided across two plates, take care not to print the same side.
The print is very simple but requires a few precautions:
- the print requires supports; for less material waste and a higher surface quality I have designed the model so that both parts are oriented on the plate on the back face: this way you will only have supports in the candle hole and not on the surface of the heart;
- you have two print profiles where in one I used PETG as the material for the upper interface of the supports (Z Eight= 0mm setting) and in the other PLA on PLA;
- Prime Tower and AMS are only active in the print profile with PETG as the support material for the upper interface.
The models in the photos were printed with PLA matte. The choice of color(s) is yours.
Enjoy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)