NFT Angled Grip (MLOK) - Free 3D Print Model

Search models, users, collections, and posts

Jackmnb

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

H2D

X1 Carbon

X1E

P1S

P1P

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm AND 0.12mm layer Plate for each 6 walls 100% infill

7.1 h

2 plates

5.0(93)

Open in Bambu Studio

Boost

1617

4394

173

127

4 k

2.2 k

Released

Description

MLOK Angled grip, Uses M4 MLOK screws I found mine on Amazon. Grip is angled 7 degrees so it can be used on all your pistols.

I recommend printing all my files with 100% infill.

Documentation (1)

Other Files (1)

README.txt

Comment & Rating (173)

@wendelland01

Print Profile

0.2mm AND 0.12mm layer Plate for each 6 walls 100% infill

This came out super well in PETG-HF, great feel. Edit- I tried the 0.12 layer with PETG-CF, absolutely love it

(Edited)

@Ghutt422

did you print it at 1.2 on the first one? I tried printing this in PTEG-HF as well and it had horrible layer lines in it. I am also fairly new to printing.

(Edited)

@wendelland01

Replying to @Ghutt422 :

Yes 0.12 worked great. Possibly a settings issue? I haven’t tried PETG-HF.

(Edited)

@mihaja

Had to widen the holes with a screwdriver for the screws to fit but it works perfectly!

@fireowl58

Print Profile

0.2mm AND 0.12mm layer Plate for each 6 walls 100% infill

perfect print. solid. light. and I actually really enjoy the length.

@user_1600063169

Boosted

Print Profile

0.2mm AND 0.12mm layer Plate for each 6 walls 100% infill

Perfect!

Show original

@Kodama_95

Print Profile

0.2mm AND 0.12mm layer Plate for each 6 walls 100% infill

Solid grip, came out super clean, looks good too and fits perfectly.

(Edited)

@JoeyB84

Boosted

Print Profile

0.2mm AND 0.12mm layer Plate for each 6 walls 100% infill

amazing

@Loki_Wade

The print profile is no longer public

used PET-CF and it appears to be pretty dang good quality

@JumbeRock

what layer height did you use?

@dsmck90

The print profile is no longer public

Printed really well and the supports were some of the easiest to remove I’ve ever encountered. I printed it in PLA CF because I just plan to use it to see how I like the feel of this style of foregrip. Overall it’s a really nice design.

The profile uploader has replied

@trixone

thanks i experimented various types of support and i love them too, thanks for the support.

@user_4085709784

Boosted

The print profile is no longer public

Overall great print, the bottom supports ended up being a pain, and it took a little work with the Dremmel to clean it up. Looks great and is very sturdy printing at 100%. Printed in PETG-CF