A1 Nozzle Scraper (Ultra-efficient, less than 1 gram)
Print Profile(1)
Description
When printing PETG or other filaments, you often encounter the nozzle dragging "long strings"!!!
Then you adjust the leveling, print the first layer, etc., which will have a negative impact!!!
Therefore, this nozzle scraper was created.
Super material saving!!! Super material saving!!! Super material saving!!! (Less than 1 gram is enough to complete the printing)
There is a recess in the A1 cleaning baffle, simply install it!!!
You also need a relatively thin aluminum can, cut a metal sheet 10*11mm long and high, and insert it into the semicircular groove!!!
Then, trim it according to the actual exposed part, keeping only 1mm exposed, and then refer to the picture direction, slightly to the left of the center, cut a small triangle!!!
It has been used for a week, and the time continues to increase... the use is excellent!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)