Print Profile(1)
Description
Merry Christmas and Feliz Navidad!
Enjoy this festive ornament of a cactus enjoying the holiday season.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Gold Transmission Distance: ??
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Brown
At layer #15 (1.28mm) swap to Gold
At layer #19 (1.6mm) swap to Jade White for the rest.
For the blue, change the colors as follows:
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue
At layer #18 (1.52mm) swap to Jade White for the rest.
Yup, I store my PLA in the open air. Dreadful habit, I know. If you share this terrible habit and your print has some stringing, I find a stiff toothbrush is quite effective at removing them. The more stiff, the better. If there are really stubborn ones still hanging on, I break them with the tip of a pair of tweezers, then brush it again to remove them. Most are gone after that. Cheers!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)