Cyberpunk: Edgerunners David's Pendant

Replicating David's pendant from Cyberpunk: Edgerunners, this design incorporates a magnetically controlled light for a dazzling effect.

Assembly and Printing Instructions:

1. A magnetic light is optional; you can also print the front cover using glow-in-the-dark blue filament or similar. However, a magnetic light offers a more dynamic result.Materials required: One blue magnetic light, one 8x3mm round magnet.
2. If using a magnetic light, the front cover requires a translucent material; I used semi-transparent sky-blue PETG.
3. The design supports a maximum 1cm diameter magnetic light. A small amount of glue or tape can secure it, though this isn't strictly necessary.

4. The front cover has a small protrusion; this faces upward and inserts into the main body.Note: Once inserted, removal is difficult; ensure the magnetic light is installed beforehand.

   

5. The main body's top features a recess for the magnet, facilitating easy access to control the magnetic light. The magnet size is 8x3mm.
6. If the magnet is sufficiently strong, the magnet recess may not need complete removal for insertion; the light can be controlled directly.
7. Necklaces up to 7mm in diameter are suitable. I also provide a printable version, approximately 1.3m long. Many thanks to the original chain designer @ferjerez3d, whose work can be found at https://cults3d.com/en/3d-model/fashion/print-in-place-chains-up-to-18-meters, offering various lengths.Note: A brim is necessary for printing; I was unsuccessful without one. Prints were perfect with a brim.