Hueforge Harry Potter and the Prisoner of Azkaban

Hueforge stampato in ABS con 6 colori. Usato un solo AMS con la sostituzione dei primi 2 dopo il termine con i successivi 5 e 6.

Altri miei modelli li potete trovare qui : https://makerworld.com/it/@acaacacan

Project: azkaban.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.4mm

Filaments Used:
ABS Bambulab Black Transmission Distance: 0.5
ABS Bambulab Blu notte Transmission Distance: 2
ABS sunlu blu Transmission Distance: 5
ABS Sunlu verde Transmission Distance: 5
ABS Bambulab giallo scuro Transmission Distance: 3.5
ABS Bambulab White Transmission Distance: 6
This print uses 6 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blu notte
At layer #10 (0.88mm) swap to blu
At layer #13 (1.12mm) swap to verde
At layer #18 (1.52mm) swap to giallo scuro
At layer #19 (1.6mm) swap to White for the rest.