P1P Arc enclosure poop chute 2 sizes
Print Profile(2)
Bill of Materials
Description
Boost Me (for free)
If you like my work, a boost is apreciated :) It cost you nothing and helps me continue my work :)
Update 22.12.24: Bigger box added
If you print a lot of multicolor, the small chute is maxed out quite quickly. I recommend to print the bigger box for those cases.
There are many poop chutes for the P1P/S X1. Bot none of them was fitting the P1P with the “Arc enclosure” perfectly.
So i designed my own from scratch, inspired by those many ideas out there.
This one also fits if you have narrow space behind the printer like me. It is only 52mm in width behind the printer backwall.
Poop chute is detachable for easy cleaning.
If you want, you can use 10x2mm magnets (maximum size, smaller is also possible). The chute needs 3 magnets and the detachable bucket 2.
If you still use the genuine P1P backwall which is made out of metal, you are all set.
If you printed your own backwall to fit a chamber fan, just glue 3 magnets from the inside to the printed wall.
You dont need AMS for multicolor print. Just some glue at the end for the Bambu logo and the inlay.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)