Convoy S2 C8 Benchmade Clip Adapter

I was looking for a deep carry clip that would work with the Convoy S2+ and C8+ flashlights. I couldn't find anything that had a high quality look that matched the curvature of the Convoy tailcaps. I designed this 3D printed adapter so I could use a flat-style clip on the round tailcap of the flashlights.

I'm not going to lie, the installation is not easy. The tolerances are super tight and this could have used a 0.2mm nozzle for better resolution. However, I don't have one yet for my BambuLab A1 so I ‘made it work’. After installed the clips are tight and work quite well.

The adapters are designed in OnShape so feel free to update/remix as you see fit.
https://cad.onshape.com/documents/43afde40548e69c2b07fd2c3/w/912869c882736bf4868c9326/e/38786c5e67dc5f4c633388c6

The benchmade clips were purchased from AliExpress.
https://www.aliexpress.us/item/3256807900208804.html?spm=a2g0o.order_list.order_list_main.71.60e81802TIqz8c&gatewayAdapt=glo2usa

The crumby bit is that the screw length required to not hit the button is 7mm. Unfortunatly, I couldn't find any. I cut the 8mm screw from this set to fit.
https://www.aliexpress.us/item/3256806015649857.html?spm=a2g0o.order_list.order_list_main.5.60e81802TIqz8c&gatewayAdapt=glo2usa