F-35 Modified Fighter Jet (Bluebird Fighter)

Initially, the intention was to create a model airplane identical to the existing F-35, but halfway through the process, I realized that designing a future modification would also be excellent, so I created this fighter jet model, which I call "Bluebird".

The airplane is 165mm long and 220mm wide, printable on the A1 MINI, with a support-free design, split printing, and all connections utilizing T-slots; only the two missile models require glue to attach the warhead to the body.

Due to the small size of the pins, the wheels and the support structure require standard toothpicks for connection. The wheels are foldable, and some force is needed to firmly insert the wheel support into the fuselage.

In the pictures, I used a 0.2mm layer height for printing, and the results were satisfactory. I recommend using a 0.16mm layer height for printing, as this will yield a superior visual result.

Finally, please provide feedback after downloading and printing, thank you!