Airbrush rotary - turntable with helping handle - Free 3D Print Model

Search models, users, collections, and posts

SM Design

Hobby & DIY>Other Hobby & DIY

IP Report

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

12.4 h

3 plates

5.0(377)

0.2mm layer, 2 walls, 15% infill

6.2 h

2 plates

5.0(118)

Open in Bambu Studio

Boost

3057

8644

817

509

6.3 k

3.7 k

Released

Description

As a model maker, I made an airbrush turntable primarily for my own needs. It's a little stronger than usual, so it can handle even the toughest parts.

It is primarily made for an A1 printer, but I think it can be scaled for an A1 mini.

It contains two bases (higher and lower) depending on needs. If used in a spray booth, a handle can be added for easier turning.

If you're painting some small things with a brush, check out this model

The top plate has a good grip, so it is easy to turn with your hands. For smoother rotation, it is recommended that you add a little grease to the shaft of the base. It has a hollow shaft into which you can add weight for better stabilization if needed.

The base contains holes for self-adhesive anti-slip silicone gel pads, which you can get on Temu or Aliexpress.

Link: https://shorturl.at/BXRPB

Boost Me (for free)

If you like my model and want to support me, please consider donating a boost! Thanks!

Comment & Rating (817)

@Batmanfan67

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed perfectly. The void in the centre of the base is perfect for a one kilo weight to give it some mass and greater stability, holding it firmly on my bench. I may need to print a few more to keep sevaral minutures on the go at once. Would like an option to extend the top plate for bigger items like helmets (or my batman cowl)

The profile uploader has replied

@SM_Design

Thank you for your comment. I have a profile with a helmet holder that I designed for a user here, and I can share it with you if you're interested.

(Edited)

@Batmanfan67

Boosted

Replying to @SM_Design :

Yes indeed, that would be amazing, thank you!

@Torvik117

Replying to @SM_Design :

Hi, my friend, this would be very useful, where can I see this model?

@CareysRN

Boosted

This made icing this cake sooo much easier

The designer has replied

@SM_Design

It's nice to see that you're enjoying it! Enjoy, and thanks for the boost!

@Talvyn

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great rotates smoothly

The profile uploader has replied

@SM_Design

Thanks! Nice setup btw!

@Talvyn

Replying to @SM_Design :

Thank you

@freshwes

I'm new to this, I love you setup. Can you share a link to buy the lights? Do they get covered with paint? How does the vent work in the back? Thanks!

@ricco_damiano

Print Profile

0.2mm layer, 2 walls, 15% infill

I use it for my airbrush booth, alligator clips can be easily inserted into the holes, and it is absolutely simple and practical Thumbs up, exactly what I was looking for, and one of the best functioning models

The profile uploader has replied

Show original

@SM_Design

Thank you! Enjoy!

@user_147161225

I resized it to 125% to fill the X1C plate. I used pennies to weight down the base, put rubber feet, and used dry PTFE to lubricate. Works very well but unfortunately the handle breaks off right above the threads. Works just fine with the handle though.

The designer has replied

@SM_Design

Thanks! It's possible that the thread clearance decreases as the model gets larger. I wouldn't know because I haven't tried it.

@KayHawaii

Print Profile

0.2mm layer, 2 walls, 15% infill

I am just starting out with airbrushing and was looking for a good turntable This model fit the bill It printed superbly and the turntable rotates exceptionally smoothly—even without lubricant The option to print a taller base is fantastic, even though I haven't used it yet A potentially excellent addition would be an even flatter version

The profile uploader has replied

Show original

@SM_Design

Thanks! Nice color btw! By the flatter version, do you mean the version without holes on top?

@KayHawaii

Replying to @SM_Design :

No, the holes are great. I mean a version where the turntable is even lower - closer to the table.

@SM_Design

Replying to @KayHawaii :

That would require a different approach, especially to the upper part, which essentially makes this model what it is. It would have to be shortened, losing the axis and stability on which it rotates. In that case, the handle would have to be modified.

@critter0527

Boosted

boosting a second time because I just had a really hard to scan project go very easily because of this little green turntable. hands down the most useful thing I’ve printed. Would have to spend hundreds of dollars to buy this at a store.

The designer has replied

@SM_Design

Thank you very much! I appreciate it! I'm so glad I was able to help somehow!

@fyiden

Great idea! printed without any issues. PLA for the top and PETG for the base.

The designer has replied

@SM_Design

Thanks!

@PrintGeggo

Print Profile

0.2mm layer, 2 walls, 15% infill

The print worked great. I greased it with silicone spray so it would spin more easily

The profile uploader has replied

Show original

@SM_Design

Thank you!

@MikeyCanuck

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great! Spins very freely. Thanks!

The profile uploader has replied

@SM_Design

Thanks!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.