Pegboard Hooks for Round Holes (25mm Spacing)
Print Profile(1)
Description
Boost Me (for free)
Round pegboard hook Pegboard hole spacing 25mm, hole diameter 6mm
Hook model hole spacing 25mm, hole diameter 3.8mm
Hooks are available in three lengths: 65mm, 100mm, and 150mm
Horizontal placement is recommended, although it requires more supports, the print time is shorter and the strength is higher
Model is pre-arranged
Attention! Attention!
1. Two different arrangement methods result in varying strengths; horizontal arrangement is recommended for superior Z-axis strength. 100mm and 150mm lengths are excessively long, resulting in lower load-bearing capacity; printing these lengths should be considered carefully.
2. This hook is only suitable for commonly used Chinese round pegboards approximately 1mm thick, with 25mm hole spacing and 6mm hole diameter. It is unsuitable for other thicknesses; modifications to the design are required for alternative pegboards.
3. The author used PLA for printing with negligible shrinkage. Using other materials may lead to dimensional discrepancies; adjust the material shrinkage rate as needed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (30)