Jiu Jitsu poster
Print Profile(3)
Description
Jiu-Jitsu phrase to put on the wall.
Feel free to resize it at X and Y only.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 113.51x200.01mm in size
You may print at higher layer heights below the Min Depth of 1.1mm
The Max Depth is 2.9mm and the Actual Depth is 1.9mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue Gray
At layer #18 (1.52mm) swap to White for the rest.
Boost Me (for free)
Let me know if you like it leaving a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)