Cardcaptor Sakura Bird Head Staff V1 White Unassembled One-Piece Print

This model depicts the magical wand of Sakura Kinomoto, the protagonist from the anime Cardcaptor Sakura. This model is designed for print-in-place, requiring no separate parts, and measures approximately 30cm in length.

The model is meticulously crafted, referencing both the Cardcaptor Sakura anime and existing market products. After numerous optimizations, it boasts exceptional accuracy and aesthetic appeal. Larger and smaller versions will be released subsequently.

Should you encounter printing issues, please promptly provide feedback to aid in model improvement. If you find the model satisfactory, please consider giving a free boost.

Printing Instructions

1. Ensure the build plate is clean and free of grease before printing.

2. This model is unsuitable for printing on the A1 mini. Adjust the filament type as needed during printing, but avoid altering other print settings.

3. This model necessitates substantial supports. Employ pliers to remove supports, carefully separating them from the model at the point of connection. Avoid manual removal.

4. A sharp craft knife is recommended to scrape away any residual support material after removal.

5. The sample image showcases a model printed using white PETG filament, demonstrating considerable durability.

6. The model is a single-piece white print. For color customization, select white or light pink filament for printing (consider the color of the bird's wings and the handle).

Should printing problems arise, the Bambu Wiki may be of assistance:Print Quality and Troubleshooting | Bambu Lab Wiki