Bambu Lab Reusable Refill Spool - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

VkvitV

3D Printer>3D Printer Accessories

IP Report

GIF

Print Profile(10)

All

X1 Carbon

H2D

H2C

P1P

P2S

X1E

P1S

H2D Pro

H2S

X2D

A2L

A1 mini

PETG, 0.2mm layer, 3 walls, 15% infill

Designer

3.8 h

2 plates

4.9(5.1 k)

Removable Sticker Pad, 0.2mm layer, 3 walls, 15% infill

Designer

11 min

1 plate

5.0(35)

PLA profile, 0.2mm layer, 2 walls, 20% infill

4.7 h

2 plates

4.9(2.2 k)

[ABS] 0.2mm layer, 2 walls, 15% infill

4 h

2 plates

4.9(301)

Click to see more

Open in Bambu Studio

Boost

13193

39195

9501

3.9 k

74.3 k

56 k

Released

Description

Boost Me (for free)

If you liked my model, please support it with a boost if possible. Thank you.

I strongly recommend drying the plastic on this spool only in a horizontal position (for example in a fruit dehydrator). Drying in a vertical position when exposed to 1 kg of plastic will most likely lead to deformation or print the spool from ABS or ASA.
Not intended for vacuum packaging.
Not intended for use on side holder.
Not intended for user's winding.
Using it with AMS Lite is possible, but some users are happy with it and some are not. I haven't personally tested it.
The use of a lock is mandatory.

Update 01.01.26

Added a profile with a removable sticker pad.

==========

Update 07.08.2025
Strength has been slightly increased, symmetrical clips have been added.

==========

Update 20.12.24

Despite the fact that the built-in clips did not catch on any part of the AMS body during the tests, they are still unpleasantly close to one of them. Therefore, I decided not to wait for a precedent and moved the clips to where they 100% will not catch on anything. The shape of the filament indicator was also changed to a more symmetrical one, as well as the font of the numbers.

==========

After analyzing several remixes on the spool, I decided to make my own, where I will not just chop up the STL from Bamboo Lab, but use reverse engineering and do everything as it should be.

The model turned out to be quite light, durable and got a place for a sticker, a filament remaining meter and also more convenient filament thread fasteners, in general, everything in one.

No claims to the accuracy of the filament remaining meter are accepted, the marks were transferred from the sticker that Bambu Lab provides with the spool. In any case, such marks have a purely approximate accuracy.

Works with AMS Lite.

A little extra piece it's a lock.