Openwork keycap spacebar, requires 5g filament (spacebar length)

Matching keycapss: [Click to view]

December 18th: Launched2.25U keycaps, suitable forR1 shiftandR2 enterreturn keys,Thank you all for your support, likes, downloads and collections. Thank you. I have less things to do, and it's also the end-of-term exam, I will strive tothese two weekscomplete and finish the remaining keycaps, namely 2U, 1.75U, 1.5U, 1.25U, and new keycaps will also be launched later

After the previous ESC keycap, I also made the spacebar at an extremely slow pace.

Print settings directly print, the texture is really good, it's really not easy to break, for the problems of the last model, such as the shaft is easy to break.

The print is like a spiderweb cave, these problems have been solved by the printing of the last model, I believe everyone has solved them. Hahaha

About the model

There are a total of four STL files and one configuration file

These four STLs are respectively the original keycap R1 tilt angle and no tilt angle, the shaft is six or three, may be the keyboard manufacturer's strategy to adapt to different keyboard models, when printing, remove the others, choose the one that suits your keyboard.

What is R1, why is there a tilt angle?

In the previous keycaps, it is the R4 height of the original keycap, so using the last keycap installed in other positions, although the appearance is good, but the feel may be lacking, therefore, this time I also made different rows of 1U keycaps, so you can also download and print to replace, you also do not need to worry about breaking, because the spacebar used by the foot used keyboard, the first to break should also be the keyboard and not the keycap.

Then the quality of the print is really good, I used A1mini without enclosure printing, so you can definitely print a very good keycap.

Keycap Distribution