Multicolor 3x3 Rubik's Cube (requires screws and springs)

Requirements:

• Filament: 6 or 7 different colors (can be printed separately, any filament)
• Screws: 6 x M3 screws, 14~16mm in length
• Springs: 6 x springs, 0.5mm wire diameter, 4.0mm outer diameter, 10mm length
• Lubricant: optional

You can choose to print a single-color version with your preferred filament, color, and quantity.

Notes:

• Please ensure the color placement is correct before installing the color blocks, as they will be almost impossible to remove once inserted.
• Consider printing extra edge pieces, corner pieces, and color tiles if you are unsure.
• Tighten the screws appropriately.
• After installation, adjust the screw tightness for optimal feel.