Army Painter compatible wet & dry palette

Main item is the Brust Palette, which I use in place of the brush holder comes with the Army Painter set.

I have also worked up a compatible base and lid (optimised for FDM printers) if you don't have the Army Painter set and a cutting guide for sponge and paper to make the inserts yourself. You can hold it all together with an elastic band or velcro strap (or the AP palette strap if you have it).

This is also compatible with any AP wet palette insert, like the wonderful dry brush texture palette featured in red in my pictures:
https://makerworld.com/en/models/450978#profileId-414072

NOTES

1. When stacking you must choose either the Brush Palette or the Brush Storage insert - you can't stack both unfortunately.
2. Print with 4 walls and 4 top/bottom layers to make sure no paint or water leaks through the print. I print with 15% infill.
3. Both the Brush Palette and the Brush Storage will need to print with supports around the outside for the lip/edge, but everything else will print with no supports.