Set of googly eyes of different sizes

Search models, users, collections, and posts

Elektrooon

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

H2C

X1E

A1 mini

H2S

P1P

X1 Carbon

H2D Pro

P2S

H2D

X2D

A2L

Suggested settings print profile NO AMS

Designer

28 min

1 plate

4.9(12)

Suggested settings print profile AMS version

Designer

18 min

1 plate

5.0(3)

Open in Bambu Studio

Boost

179

295

137

Released

Description

This set with different sizes of googly eyes allows you to decorate objects, decorations, puppets, pet rock and more.

The eyes are separate and can be printed individually, right and left eye are not connected and can be matched different sizes together as well as rotate each eye as desired.

Features

They are ideal for printing with filament that glows in the dark.
The pupil is raised relative to the eye for a better 3D effect and also to facilitate two-color printing if you do not have an AMS module.
The STL file provided is a single googly eye to be duplicated and multiplied on the printing plate, to be printed in pairs or to be enlarged or shrunk to liking depending on use.
The print profile already contains pairs of googly eyes of 3 suggested sizes: large, medium and small
In the print profile settings have been optimized to make the print texture not visible for a smooth result

Size

Original size: 10 x 10 x 1.2 mm. The googly eyes can be enlarged or shrunk to your liking via a scale with same proportion on X and Y axes with your slicer.

Example of use

These googly eyes can be used in a variety of ways to give a human or living touch to objects. For example, they can be glued on and used to embellish vases, greeting cards, stones, rocks, tools and more as you wish.

In the example shown in the image below, they were used to create fun and cute pet rocks by using eyes of different diameters and with different angles and proximity to create more cute, funny and amusing faces.

Translated with DeepL.com (free version)

Example of use, glued eyes on stones to create funny pet rocks

3D printing settings

Layers: 0,1 mm layers
Infill: 100%
Plate: smoot or textured for better adhesion when glued to something like paper, walls, ...
Print layers with different colours: To make only the top surface with a different colour, set a pause in your slicer at the right layer, change filament and resume printing.
Test and results: result showed in the images are printed with white and black PLA filament with printer Bambulab P1S, 0.4 nozzle, Cool Plate / PLA Plate and Textured PEI Plate, NO AMS
NO AMS NEEDED!

If you liked this model or found it useful, please consider to leave a Comment, a Like, a Boost and rate the print profile ⭐!

If you have any questions, suggestions or requests regarding my designs, please leave a comment!

Your feedback is very important to me! Thank you so much ❤️!

See my other creations here on https://makerworld.com/@Elektrooon/upload or click the image below!

Boost Me (for free)

If you liked my model or enjoy using it, please consider making a Boost 🚀❗ Your support helps me keep creating and improving models like this, with new upgrades and enhancements that you can benefit from too! Thank you very much! ❤️ Elektrooon 🦝

Comment & Rating (35)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.