RotoPax Mount (full size)
Print Profile(1)
Bill of Materials
- 5/16" bolt x 1:
- 5/16" nut x 1:
Description
RotoPax mount for their gas and fluid cans. Two models. One is designed to be attached to a surface using two #8 wood screws. The other uses two 5/16" bolts. These larger holes also work with #12 wood screws. Both use a 2" long 5/16" bolt in the handle with a captured nut. Print in PETG or ASA/ABS, as PLA will sag over time and droop in the heat. I used a generic PETG I had lying around and used the default 0.2 mm Strength setting but upped the infill to 35%. The handle is compatible with the factory mount.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)