krazyderek

cover

ryobi_circular_saw_holders.png

flat

plate_1.png

angled for 5.5 6.5 inch saws

plate_2.png

angled for 7.25 inch saws

plate_3.png

shortest

plate_4.png

20mm taller

plate_5.png

ryobi_optimized_18v_holder.jpg

Printed with Spectrum Sulfur Yellow PCTG (pictured) 0.4mm nozzle, 6 walls 50% infill. Choose from the flat, or two angled versions, based on <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@ingekohl&#39;s">ingekohl&#39;s</a> comment on a similar type of model.

0.4mm nozzle, 0.2mm layer, 6 walls, 50% infill

Printed with Spectrum Sulfur Yellow PCTG (pictured) 0.6mm nozzle, 5 walls 50% infill. Choose from the flat, or two angled versions, based on <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@ingekohl&#39;s">ingekohl&#39;s</a> comment on a similar type of model.

0.6mm nozzle, 0.3mm layer, 5 walls, 50% infill

There are already lots of versions of this style of tool holder floating around, but I got tired of;<ul><li>wasting filament printing a big empty box</li><li>not having a thick enough base to taper the mount for different angles</li><li>hard to access recessed screw holes</li><li>not looking cool</li></ul>Printed with Spectrum Sulfur Yellow PCTG (pictured) 0.6mm nozzle, 5 walls 50% infill

Ryobi 18v tool (circular saw) holder

ASIA

Print Profile(2)

Description

Comment & Rating (81)

License

Related Models