【Hearthstone Fidget Spinner】 Ratchet EDC Mini Fidget Toy Leng Brand Hearthstone

This is a small toy modeled after the Hearthstone desktop logo

It's easy to assemble and perfect as a fidget toy to de-stress

【Additional Accessories】

Requires one 【MR128 deep groove ball bearing】This accessory can be purchased at the Tu Zhu Jingdong store

Of course, you can also forgo the bearing, in which case the spin smoothness of the fidget spinner will be significantly affected, but it will still spin

With or without a bearing, the ratchet function remains unaffected and can be used normally

【Installation Instructions】

1、Install the bearing, skip this step if not using a bearing

Ensure the bearing is nearly flush within the hole, not slanted

2、Install the 【ratchet】; refer to the image below for the correct orientation of the ratchet blades. If it doesn't fit, try rotating clockwise while pressing.

3、Install the top cover. If it doesn't fit, try rotating clockwise while pressing.

4、Install the screws and nuts. Tighten as much as possible!

【A Few Tips】

1、It's best to print the 【ratchet】 using PETG filament for better elasticity and durability. I've also uploaded a single ratchet for printing.

2、Please comment on any other configurations you need; I will upload them if I see them

【About Me】

If you like this model, please give me a small like, and it would be even better if you could boost me. I will develop more interesting and refined models

I am a 3D printing novice; your support will be invaluable as I strive for a future position at Tu Zhu (a hopeful aspiration)