Layer by Layer

cover

IMG_1127_c8ae2c71-b7d4-4aaa-aa76-5f3f2caaf123.png

IMG_1018_aa93acb8-b3f1-4f7b-9bb6-eefd00fef25e.jpeg

IMG_1023_b3cfca8d-7f6e-438a-a337-be7e6501101b.jpg

IMG_1125_a5bbbda6-58c1-47a4-961e-c768c817b5b6.png

IMG_1126_13aacd40-8d26-4464-b829-9be524f19131.png

IMG_1129_ba936acd-a82e-411e-9dd2-f7af0e7c7eaf.png

plate_1.png

IMG_1018_aa93acb8-b3f1-4f7b-9bb6-eefd00fef25e.webp

Takes about 45 min on p1/x1 series, hope you enjoy this model!

Original. 0.2mm layer, 2 walls, 15% infill

IMG_1125_8cd8b48a-97a1-4cd9-95a6-078ad96c0f0d.webp

Dragon Rex 0.2mm layer, 3 walls, 15% infill

Locazer

IMG_9026_146f7dee-6e07-45bd-b3a7-599d88eb80c8.webp

A1 Mini - 0.2mm layer, 2 walls, 10% infill gyroid

The Gooser

IMG_2636.JPG

120 X 100 X 19mm SIZE, 148% Scale Thick First layer, quick Print with no supportsTime: 1 hours 35 minsFilament: 40.2g Neon City (Blue-Magenta) PLA Silk Dual Color (Bambu Lab)

120 X 100 X 19mm SIZE ~ 0.24mm layer, 2 walls, 10% infill

jjnbq7dv6h

241709433355_.pic_2abaed2f-5835-4d94-88e2-76a1a2b4c1ca.webp

0% infill, 2 walls, 

Smonstr Studio

IMG_9441.jpg

FLEXREX Magnet-Version 8x2

Nathen D.

IMG_6509.jpg

Stronger Version of the Flexi-Rex&nbsp;

A1 Mini Strong Version : 0.2mm layer, 4 walls, 10% infill 

Rat and Robot

PXL_20241115_020955889.jpg

PXL_20241115_020951640.jpg

Multi color, adaptive layer heights, top layer ironing

mantouz

image_2024-09-13_083240863.png

GIANT 0.2mm layer, 2 walls, 15% infill

comrade thomas

CC363F56-0573-4E18-960B-D539D7930395_4_5005_c.jpeg

I have made it so that there is 4 dinos on a plate with minimal print time and material.

4 dinos with little print time and material!

FreshyLabs

IMG_7351.jpeg

IMG_7352.jpeg

P1S batch print profile tuned for clean articulation on a 3-copy plate.This profile keeps the original model geometry unchanged and only adjusts slicer/profile settings for reliable batch printing.Profile notes:<ul><li>Built from a standard Bambu-compatible process: 0.20mm Standard @BBL P1S</li><li>Layer height: 0.20mm</li><li>Printer tested: Bambu Lab P1S</li><li>Material: Generic PLA</li><li>Walls: 2</li><li>Infill: 15% gyroid</li><li>Supports: none — the original model prints flat without supports</li><li>Speed tuning: outer wall 120 mm/s, top surface 90 mm/s, inner wall 200 mm/s</li><li>Seam position: back</li><li>Plate setup: 3 copies at 80% scale, pre-arranged on a single plate</li></ul>Goal: reliable batch printing of articulated joints, with cleaner seams, better layer adhesion on the joint segments, and three prints per run.

0.20mm Clean 3x Batch 80% Scale - P1S Generic PLA

https://www.printables.com/model/46241-flexi-rex-with-stronger-links/files

<h3> </h3><h3> </h3><h3>Print instructions</h3>The recommended print settings are:<ul><li>0.2 mm layer height</li><li>3 perimeters (important, to make the links strong)</li><li>15% infill</li></ul>Expect about 45 min to 1 hour print time for a good quality print.Don&#39;t use a high infill value, this could cause it to become unbalanced. For improved stability, you could increase infill on the piece with the feet below it, but this should no longer be necessary with the newest model.&nbsp;*this is also the version with stronger links&nbsp;*added dragon fire rex!&nbsp;&nbsp;*The “dragon fire rex” is my remix. The one without dragon fire is the one that I remixed the model from, and is by <a target="_blank" href="https://makerworld.com/en/u/2416581196" rel="nofollow noopener ugc">DR.LEX</a>.

The original Dragon Flexi Rex

giogiosici

flexiDinoTennis.jpg

tennisDino1.png

Tennis Flexi Dino

M-Lab

file_000000004a787230a58f9299fcf370b7.png

Flexi Dino Punk Revolution

ASIA

Print Profile(11)

Description

Print instructions

Comment & Rating (3025)

This remix is based on

License

Remixes (30)

Related Models