Hunting Arrow Quiver 6.3" Bolts Stembow Stinger AR-6
Print Profile(2)
Description
Update!
As the initial version lacked stability, I refined it, creating a remix incorporating a simple box from fgebhart and elements from the previous iteration.
This yields a PIP box for six bolts. If your bolts are too snug, the box may warp, preventing closure. Should this occur, carefully enlarge the holes to accommodate your bolts.
___________________________________________________________________________
Loose bolts, once removed from their packaging, become a nuisance, scattering within one's bag.
This proved quite irritating! Jagd and Botkin tips, in particular, pose a challenge due to their sharpness, readily damaging materials.
Finding no online solution, I designed my own. After considerable experimentation, this approach seemed most effective.
- The holders are designed to accommodate all brands and generic 6.3mm darts/bolts (at least, all those I own, ranging from full plastic to aluminum and carbon)
- I recommend printing the holder using at least PETG. PLA is also suitable. I tested TPU; the material proved too soft and thus unsuitable.
| To safeguard your Botkin and practice bolts, I've designed this: https://makerworld.com/de/models/904273#profileId-864038 | For enhanced Botkin holder stability, consider this print: https://makerworld.com/de/models/903180#profileId-862681 |
|  |
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)