Jeff The Land Shark Hueforge - Marvel Rivals

Jeff the Land Shark has stolen the hearts of gamers all over the world while they play Marvel Rivals. Now you can print your own hueforge painting of Jeff! The instructions for color changing is down below:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm

The Model is 200x200mm in size
 

You may print at higher layer heights below the Min Depth of 0.48mm
 

The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
    PLA Elegoo Gray Matte Transmission Distance: 2.2
    PLA BambuLab Basic Turquoise Transmission Distance: 1.4
    PLA LikeSilk Dark Blue Transmission Distance: 3.2
    PLA Anycubic Black Transmission Distance: 0.5
    PLA Kingroon Yellow Transmission Distance: 5.4
    PLA BambuLab Basic Maroon Red Transmission Distance: 1.2
    PLA Inland Red Transmission Distance: 3.3
 

This print uses 8 unique filaments

Swap Instructions:
    Start with Ivory White
    At layer #11 (0.52mm) swap to Gray Matte
    At layer #12 (0.56mm) swap to Turquoise
    At layer #17 (0.76mm) swap to Ivory White
    At layer #20 (0.88mm) swap to Dark Blue
    At layer #24 (1.04mm) swap to Black
    At layer #25 (1.08mm) swap to Ivory White
    At layer #28 (1.2mm) swap to Yellow
    At layer #37 (1.56mm) swap to Black
    At layer #41 (1.72mm) swap to Maroon Red
    At layer #43 (1.8mm) swap to Red
    At layer #49 (2.04mm) swap to Ivory White for the rest.