LCFigure

cover

IMG_5879.JPG

IMG_5877.JPG

IMG_5878.JPG

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

2024-12-25_37db1b5748d7f.jpg

Multicolor - 7 plates

QQ20241225-234039.png

1 Color - all on one plate

LittleMatt

photo_5881936898916730653_y.jpg

A1 profileMore print time for a flawless print.Rotated white wings to avoid supports and breaking problem after printing and printed them 100% infillAdded brim to the tail and changed support type for better removal

flawless print 0.16mm layer,white wings rotated 100%infill

N405

IMG-20250122-WA0004.jpeg

I had some issues with the designer&#39;s print profile. At first, it was very difficult to separate the white-green wings from the support. That&#39;s why I switched to a PETG layer. Additionally, the head and the red wings were also hard to detach from the support. Changed the support to tree support.

Ho-oh (Pokemon) [Addressed some issues I had with support ]

uroborosf

IMG_0341.jpeg

IMG_0338.jpeg

IMG_0339.jpeg

IMG_0336.jpeg

IMG_0337.jpeg

IMG_0340.jpeg

This is a comprehensive multipart - hope you like it because I spent couple of days to disasssemble and test it.Various layer settings - 0.12-0.16 dependable on size of the part. I used thick supports for the red wings and body part - it was hard to remove but I had couple fails with these 200% settings before that.Most of the precise parts I lowered acceleration and used 50% speed regulation on printer level. I rather get smooth print slower than nothing.If something is to tight (especially eyes) just scale it down to 96-98% - it does not take much material to print couple of parts with different sizes and orientations for better quality - I personally like my part printing vertically but most of them have flat part for easy horizontal print if you don&#39;t mind layer lines.Profile is not tested with original model scaling. Do not expect quality of multicolor print - I added real print close up photos of what you can expect.

200% Comprehensive Multipart (Head, Wings, Feet)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my models!</boostcontent></boostme>Check out my other models!!&nbsp;Freestanding, no base needed!!!&nbsp;5 Colors - But only require 1 AMS !!Bambu filaments&nbsp;Head - Dark red, White, Black, YellowBody - Dark redBelly - WhiteFeather - White, GreenTail - yellowLegs - Black, WhiteNeck - Green&nbsp;Normal support enabledPrint more

Ho-oh (Pokemon) Multiparts 170mm Tall

ASIA

Print Profile(5)

Description

Comment & Rating (210)

License

Related Models