Umbreon in gold
Print Profile(3)
Description
Boost Me (for free)
Boot this model if you like it
As usual you can resize this in X and Y
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 115x204.44mm in size
You may print at higher layer heights below the Min Depth of 1.2mm
The Max Depth is 3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA+ Sunlu Orange Transmission Distance: 5
Silk PLA Overture Gold
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Blue Gray
At layer #17 (1.44mm) swap to Orange
At layer #22 (1.84mm) swap to Gold for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)