Hardening Mod for Fanatec CSL Pedals (Without Load Cell)
Print Profile(1)
Bill of Materials
- Perno x 2: m6x60
- tuerca x 1: m6
- muelle x 1: 20x15x65
Description
Mod to add a spring and harden the brake pedal of the Fanatec CSL. These are fantastic pedals, the best for their price, but if you don't like the load cell, they may feel soft, especially the brake. With these parts, you can add a spring and harden them a bit at will. I used a spring 65mm long and 20mm in diameter, with an inner diameter of 15mm, but a similar one will work. It needs two 6x60mm metric bolts and two M6 nuts, plus four washers. The round parts, two are to be placed on the top side of the pedal (15mm) and the other two, to be placed underneath. It may make a little noise, but with some silicone grease (lithium grease attacks plastic) it can be softened.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)