Naruto Uzumaki HueForge - Free 3D Print Model

Search models, users, collections, and posts

gator_1966

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 1 walls, 100% infill

Designer

4 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

Released

Description

My first HueForge and very first upload to MakerWorld! I purchased HueForge as soon as I saw some of the models created using this amazing program. A family friend likes Naruto, and I came across this wallpaper (Naruto Uzumaki Intense Look Wallpaper) which seemed like the perfect starting point. Totally messed up the first print (all black since I didn't read all of the directions, LOL). Second attempt worked perfectly. Anyway, I sized it to fit into this Frame Hueforge 150x210 Horizontal mode so that's the next print for today. I'm not too sure on the TDs for a couple of the filaments in my library.

HueForge Describe

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 210x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA+ Creality Red Transmission Distance: 3.6
    PLA Solutech Orange Transmission Distance: 6
    PLA+ Esun White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #12 (1.04mm) swap to Orange
    At layer #16 (1.36mm) swap to White for the rest.

naruto uzumaki

Hue Forge