Search models, users, collections, and posts
Pikachu - Hueforge - 200x200 - Pokemon
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
9.6 h
1 plate
Open in Bambu Studio
Boost
54
102
11
14
113
70
Released
Description
Who doesnt love Pikachu? One of the iconic Pokemon out there. Here are my settings below:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Generic White Transmission Distance: 6
This print uses 4 unique filamentså
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Red
At layer #19 (1.6mm) swap to Yellow
At layer #30 (2.48mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (11)