Cardcaptor Sakura Wand, Scepter, Lightning Separate Parts Version, Limited Position Assembly Version

The original model's external interface, where the insertion tube is easily stressed and broken, is now changed to an embedded type. The model is hollowed out internally, and the tube is inserted into the model, doubling the strength and making it less prone to breakage.

The original bird's beak and upper part of the bird's head were together, requiring multi-color printing, which was time-consuming and wasteful. The bird's beak has been separated and printed with the eyes. Single color printing.

After combining the original bird's head into upper and lower parts, it is changed to left and right parts. Holes are dug inside the bird's head, and it is connected through parts to prevent misalignment of the seams.

Position limits have been added to the connections to prevent problems with adhesive angle displacement.

2.0 PVC pipes are used for the pipes, with lengths determined as needed. Colored pipes can be purchased, or you can modify or paint them yourself. Use colored tape for painting.

If PVC is not used, the column body can also be printed.

Partial coloring used brush painting.

Reprinted:Cardcaptor Sakura wands by conorokane - Thingiverse Cardcaptor Sakura wands