NexNex2024

cover

plate_1.png

2024-12-30_fdbae51d44b2.jpg

I recommend this profile for the best quality and easy printing.&nbsp;If you prefer not to glue the lid, you can use the “Tree Supports, Can in One Piece, 0.12 mm” profile. However, keep in mind that this option uses more material, takes longer to print, and may require pliers to remove the supports, depending on your filament.

Lid and Can Separate 0.12 mm Profile

6021813851919598888.jpg

This is the profile I would recommend for easy printing. For the best quality, choose 0.12 mm.&nbsp;If you prefer not to glue the lid, you can use the “Tree Supports, Can in One Piece, 0.12 mm” profile. However, keep in mind that this option uses more material, takes longer to print, and may require pliers to remove the supports, depending on your filament.

Lid and Can Separate 0.16 mm Profile

6021813851919598895.jpg

Lid and Can Separate 0.20 mm Profile

6021813851919598891.jpg

This profile uses a 0.12 mm layer height and tree supports. Choose this if you do not want to glue the lid on. But you might need pliers to remove the supports from the inside of the can. You can also print the can and the lid separately; there is a print profile for this.

Tree Supports, Can in One Piece, 0.12 mm

6021813851919598880.jpg

This profile uses a 0.16 mm layer height and tree supports. Choose this if you do not want to glue the lid on. But you might need pliers to remove the supports from the inside of the can. You can also print the can and the lid separately; there is a print profile for this.

Tree Supports, Can in One Piece, 0.16 mm

This profile uses a 0.20 mm layer height and tree supports. Choose this if you do not want to glue the lid on. But you might need pliers to remove the supports from the inside of the can. You can also print the can and the lid separately; there is a print profile for this.

Tree Supports, Can in One Piece, 0.20 mm

Adam

IMG_7448.jpg

This is a printed lighting puck that utilizes 12V led strip lights, a terminal block for connecting the wire to the lights, and a 12V power supply. It is a slip fit design with a lip around it to prevent the puck from falling in to the can.

Light Puck 0.12mm layer, 2 walls, 15% infill, No Support

IMG_7554.JPG

IMG_7552.JPG

This model profile goes with my “Light Puck”  profile recently uploaded, and it modified the can to add the ability to plug a 12 Volt power supply directly to the back of the can to power the LEDs. These 12V jacks can be found on amazon, as well as the LED strips and joining block. &nbsp;12V Jack- <a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon.com/dp/B0BW8N7XZ7?ref=ppx_yo2ov_dt_b_fed_asin_title&amp;th=1">https://www.amazon.com/dp/B0BW8N7XZ7?ref=ppx_yo2ov_dt_b_fed_asin_title&amp;th=1</a>LEDs- <a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon.com/dp/B07PLXWPXL?ref=ppx_yo2ov_dt_b_fed_asin_title&amp;th=1">https://www.amazon.com/dp/B07PLXWPXL?ref=ppx_yo2ov_dt_b_fed_asin_title&amp;th=1</a> LED Joining Block- <a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon.com/dp/B0BLCQXSXH?ref=ppx_yo2ov_dt_b_fed_asin_title&amp;th=1">https://www.amazon.com/dp/B0BLCQXSXH?ref=ppx_yo2ov_dt_b_fed_asin_title&amp;th=1</a>

0.12mm layer, 2 walls, 100% infill With 12 Volt Plug Mod

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Print Profile(8)

Bill of Materials

Description

Take a look at some of the other models:

Comment & Rating (119)

License

Related Models