Wine holder - Bottle holder - Free 3D Print Model

Search models, users, collections, and posts

oizopetr

Household>Decor

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

2.5 h

1 plate

4.6(94)

Support set to "tree strong" to prevent failing. A1 Mini

2.9 h

1 plate

4.7(17)

0.08mm layer, 5 walls, 25% infill

5.5 h

1 plate

5.0(1)

set for open air to help wisertaxrocks specifically

3.9 h

1 plate

3.0(1)

Open in Bambu Studio

Boost

1445

3344

154

2.1 k

1.1 k

Released

Description

The appearance of a spilled bottle. Wine holder or support for a bottle of wine or other alcohol. a print with a spill is needed.

Comment & Rating (154)

@clawf1ng3r

That didn't work. Printed from the App, will try again from PC.

The designer has replied

@oizopetr

Supports are missing.

@clawf1ng3r

Replying to @oizopetr :

yeah. tried again, support broke off about an hour before end. this sucks :( obviously, i'm not the only one with this problem. many print it without a problem, though. any hints? I'm on an A1 Mini and print Geeetech PLA.

(Edited)

@clawf1ng3r

Replying to @clawf1ng3r :

Running one last try with Sunlu PLA+

(Edited)

@EG_007

Print Profile

0.16mm layer, 2 walls, 15% infill

unfortunately my first failed print. anyone know why this might be? I just printed something before with this filament so not sure why :( apart from obvious bad but the rest is good. would love to do again!

The profile uploader has replied

@D00mkitty

Oh No! that stinks when you get so far and then it fails. I have printed a handful and never had that issue. How dry is your filament? looks like you have enclosed so I dont think it was a draft. I did have a silk for my filament what was yours?

@EG_007

Replying to @D00mkitty :

hey I used Bambu pla basic. I printed something before this one and it was fine. This was my second print in this colour. hadn’t been out the packaging long so I assume dry. I’ve been printing with a matte fillament for a few weeks no problems so I thought the room is dry enough. what about temperature? I chose 200 but usually I have the printer at 220.

@D00mkitty

Replying to @EG_007 :

Mine was at a higher temp for the fact I used silk so that could be it. You can also enable supports only on base and that can assist with it. feel free to DM me all your existing settings and I will make a custom profile for ya this weekend and test it with some bambu pla basic I have (just got some in)

@KMT09

printed straight from the Bambu app on my phone. Started good but failed when it knocked over the support.

The designer has replied

@oizopetr

Poor adhesion to the pad or adjust Z hop.

@KMT09

Replying to @oizopetr :

The bed sticks really well, I dont think that's the issue. I have to wait for it to completely cool otherwise it doesn't want to release.

@user_2372559278

It works for me too It does not work

Show original

@user_2115184319

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Perfect print. I printed in Basic PLA Black and just used generic golden spray. it even holds longer bottles!

@EG_007

hey I used the same and it didn’t work (the bit where the bottle would sit) what temp did you do?

@William_Bricker

I was a bit worried because I seen a few people having issues with this print. I manually added extra supports under the steam and had zero issues. it turned out great! thank you for the work!

@VanBros13

Print Profile

0.16mm layer, 2 walls, 15% infill

made for a nice gift! thx!

@T3hEnemy

what's that filament? been looking to find one just like that

@VanBros13

Replying to @T3hEnemy :

Bambu lab “velvet eclipse (black-red)”

(Edited)

@Snaegon

Print Profile

0.16mm layer, 2 walls, 15% infill

Super !

@okteivia84

I managed to finish the print thanks to configuring the tree strong support. Thank you very much for the help

The designer has replied

Show original

@oizopetr

Great that it worked. Those gaps are caused by bad filament or a poorly set printer.

@Makeda_S4170

Great print. I had one support and it stuck to the plate when I took the print off, so that was perfect! Printed in pink and blue silk pla+ in less than 2 hours. I did have a small raveling just under the neck where all the other prints here seemed to have failed. I’m sure it’s because you can’t really get a support in that spot. But I did choose to slow down my overhangs at a very small angle by up to 40% so maybe that helped. I had no issues at all with the download, the file or the print. I can’t seem to give a rating, but it’s a 5 in my book.

The designer has replied

@oizopetr

Thank you.

@user_3024022324

The fluorescence also comes out beautifully ㅎㅎ Thank you I had one failure in 4 prints

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Stackable Bottle Drying Rack

item4me

55.2 k

19.9 k

Wine bottle holder

3D Magic

1.6 k

1.3 k

Dog Wine Bottle Holder

MeetYourMaker

4.2 k

3.2 k

Wine Bottle Holder

EngGraph

3.1 k

2.1 k