Bambu Lab scraper plastic blade

Bambu Lab scraper plastic blade

The image was printed with a 0.4mm nozzle and 0.08 layer height (preset). It is strongly recommended to use a smooth build plate and perform bed leveling, otherwise there is a risk of damaging the scraper and nozzle!!

This can replace steel blades, preventing damage to the build plate coating when removing models.

Using a higher-hardness material is suggested (the image uses Bing's PETG-LS, which prints a bit soft but feels quite resilient). Different materials offer varying advantages!

Bambu Lab scraper plastic blade

The image is printed with a 0.4mm nozzle and 0.08 layer height (pre-set). It is strongly recommended to use a glossy printing plate and perform hot bed leveling, otherwise there is a risk of damaging the building board and nozzle!!