Search models, users, collections, and posts
Print Profile(2)
0.16mm layer, 2 walls, 15% infill with embedded magnets
Designer
53 min
2 plates
0.16mm layer, 2 walls, 15% infill with embedded magnets
Designer
1.5 h
3 plates
Open in Bambu Studio
Boost
48
97
11
1
74
33
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
Content has been automatically translated.
Refrigerator magnets with embedded magnets in the shape of a Mickey Mouse hand.
The refrigerator magnets are approximately 45mm x 35mm in size; they are two-toned from a certain layer. Therefore, an AMS is not strictly necessary; you just need to manually change the filament.
I have also included a pause in the print file for inserting the magnets; you will need two magnets per part.
The recesses are sized for 5mm (width) x 3mm (height) magnets, which you can purchase from Bambu Lab (CA006).
You should only use a stainless steel nozzle, otherwise, for example, with a steel nozzle, the magnet may stick to the nozzle.
If you have any ideas for other shapes, feel free to let me know.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (11)