Model Firehouse 1:48 Scale (O-Gauge)
Print Profile(1)
Description
An O-gauge firehouse I made for my grandpa. It can be used in a layout or to house toys! Print all the parts shown and use some strong glue to hold it all together. This model is still a work in progress, and I will be updating it eventually. Let me know if I could improve anything! Enjoy!
(Note: The texture you see on the roof and walls in the first four pictures is NOT a part of the model. It was added on after the print. The sixth picture is more accurate to the final product.)
Be sure to check out some of my other popular models!
The BamPoo - Filament Poop Catcher for A1/A1 Mini
Boost Me (for free)
If you like this model, please consider giving me a Boost! It would really help me out.
Recommended Settings:
Filament type: PLA
Layer height: 0.2 mm
Speed: Around 300mm/s
Infill: 10% with Rectilinear pattern
Wall loops: 2
Support: No
Bed Adhesion: No
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)