Mr Krabs

非凡造物迫击炮MAX组装说明 .pdf

cover

CR13u_20250101_124042094.jpg

IMG_20250101_140254.jpg

plate_1.png

IMG_20250101_134636.jpg

<p>加强版使用了更强劲的打印弹簧，务必使用PETG保持强度</p><p>实测射程可以5米左右，小朋友注意安全</p><p>1月30日更新，调整底座开口大小，减少开裂风险</p>

<p>The enhanced version utilizes stronger print springs; PETG is essential for maintaining structural integrity</p><p>Tested range is approximately 5 meters; children should be supervised</p><p>Updated January 30th, adjusted base opening size to reduce cracking risk</p>

The enhanced version has a range of approximately 4-5 meters; outdoor play is recommended

IMG_20250101_123629.jpg

IMG_20250101_100744.jpg

IMG_20250101_123415.jpg

<p>优化摆盘和支撑，根据不同零件设置了参数，打印前请清洁打印板，校准耗材参数防止打印失败。</p><p>标准版射程约2米，适合小朋友在家中玩耍</p><p>炮管高度24.5cm，A1mini无法打印</p><p>1月30日更新，调整底座开口大小，减少开裂风险</p>

<p>Optimized part arrangement and supports, with parameters adjusted for different components.  Please clean the build plate and calibrate filament settings before printing to prevent failures.</p><p>The standard version has a range of approximately two meters, suitable for children to play with at home.</p><p>The barrel height is 24.5cm, making it unsuitable for printing on the A1 mini.</p><p>Updated January 30th, with adjustments to the base opening size to reduce the risk of cracking.</p>

The standard version has a range of approximately 2 meters, making it ideal for children

IMG_20241231_201757.jpg

<p>0.2层高2墙0填充，加有裙边方便打印</p>

<p>0.2mm layer height, 2 walls, 0% infill, with a skirt for easier printing</p>

Resupply with 6 shells

plate_2.png

plate_3.png

plate_4.png

Detail3d

file_00000000e95c720cbd714eb4238b97e3.png

<p>The mortar and shells have been colored to resemble color patterns often seen in real use. The model&#39;s geometry and print settings remain the same as the original.  </p>

Colored Mortar & Shells

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<commercialme><commercialtitle>Membership</commercialtitle></commercialme><h2><span style="color: #E14747">I don&#39;t know English, the following is from the translation software, there may be errors, please understand</span></h2><h2>This model is a mortar MAX, which is about 30cm tall including the base, and the barrel length is 24.5cm, and the A1mini cannot be printed. This time, two versions have been prepared, one is a standard version (with a range of about 2 meters) and one is a powerful version (with a range of 4-5 meters), and children need to pay attention to safety when playing。</h2><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Help me design more interesting models</boostcontent></boostme><p>&nbsp;</p><h2><span style="color: rgb(225,71,71)">Please use PETG to print the model, other filaments can not achieve the design effect</span></h2><h3>The model assembly is fixed with a small amount of printing filament, and no glue and hardware are required</h3><h3>The model uses 173g filaments, the printing time is about 7 hours and 20 minutes, please clean the printing board before printing, and you can print directly with your mobile phone.</h3><h3>Also this time, I also shot a detailed assembly instruction video, which you can click to watch</h3><figure class="media"><oembed url="https://www.bilibili.com/video/BV1iw6qYBERW/?buvid=XU034890EB3B8D02631D85A8A3D4B0B68D02C&amp;from_spmid=dt.space-dt.video.0&amp;is_story_h5=false&amp;mid=UXiZTzWoxoKsU3zgsqNv2g%3D%3D&amp;plat_id=116&amp;share_from=ugc&amp;share_medium=android&amp;share_plat=android&amp;share_session_id=d93d7227-c471-47eb-af73-ff9d4ddc2e38&amp;share_source=COPY&amp;share_tag=s_i&amp;spmid=united.player-video-detail.0.0&amp;timestamp=1735798911&amp;unique_k=vg2ckAf&amp;up_id=503560385"></oembed></figure><h2>For more mortar models, please click the link or image below to visit directly.</h2><p><a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/zh/collections/19482494-mortar-model-collection">https://makerworld.com/zh/collections/19482494-mortar-model-collection</a></p><figure class="image"><a href="https://makerworld.com/zh/collections/19482494-mortar-model-collection" target="_blank" rel="noopener noreferrer ugc"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000940447/design/2026-01-20_95322e2e7f004.jpg"></a></figure><p>&nbsp;</p>

Print Profile(4)

Description

I don't know English, the following is from the translation software, there may be errors, please understand

Please use PETG to print the model, other filaments can not achieve the design effect

The model assembly is fixed with a small amount of printing filament, and no glue and hardware are required

The model uses 173g filaments, the printing time is about 7 hours and 20 minutes, please clean the printing board before printing, and you can print directly with your mobile phone.

Also this time, I also shot a detailed assembly instruction video, which you can click to watch

For more mortar models, please click the link or image below to visit directly.

For more music box-related models, please click the image below

More clicker-related models, click the link below to view directly

For more mortar models, please click the link below to visit directly

Documentation (1)

Comment & Rating (34)

License

Related Models

Launchable Mortar MAX (Full Print Assembly)