Ink Cap Mushroom Top

A mushroom cap for my wall mounted mushroom decoration, found here : https://makerworld.com/en/models/890249#profileId-846568

 If you encounter any issues, please let me know, and I'll update the file ASAP.

if you would like a Commercial license to sell printed versions please sign up to my Patreon
patreon.com/MushroomSoda

• The larger caps are all around 2inches in diameter, the flat cap is probably closer to 4 inches in diameter.
• The larger stems are around 4 inches tall, and the small stem is about 2 inches tall.

This top is a bit fragile, and I recommend you do a bit of experimenting with a good way to print it and see what you end up liking. The best way to ensure the fragile drips dont break, is to put it on a tilt. This will leave some support marks, but with a bit of sanding it should clear up easily. Or if you use a smooth able material like polysmooth, just put it on the area that's mostly gunked up, but be careful of getting it on the drips they will melt off easily. 

I personally have it start with the drips and work up, but that has a high chance to break the more fragile longer drips, and takes more filament for the supports. But it makes a clean cap, which i like better and can just glue the drips back on when I man handle them.