Rotating Infinity Cube Ornament

Rotating Geometric Cube Ornament

This is a very cool-looking cube ornament, with a dedicated mounting platform designed for the cube; you can rotate it when you are bored.

Printing Instructions:

• It is recommended to print at the original speed; do not use the "high-speed" setting.
• This model is relatively complex. Before printing, please dry the filament; do not use damp filament to print, to avoid print failure or excessive stringing.

• The support part of the model has already been added in the design; after printing, it can be removed with pliers. The red painted areas in the figure show the parts that need to be removed.

  

Instructions for Use:

• During assembly, adjust the clamping force by tightening the bolts on both sides, allowing the cube to rotate freely.
• The cube has sharp parts. Please pay attention to safety and avoid pricking yourself.

Remarks:

• Welcome all friends to download and print my model. If you have any questions, please leave a message below, and I will reply promptly.
• The cube model in this set is another one of my works. There are three other styles available. If you like them, please visit: https://makerworld.com.cn/zh/models/795102#profileId-768853. Thank you for your support.
• If you think this model is good, please give me a free like and boost. Thank you very much!!!