Michael Jackson and Elvis Presley LED Lamp

It is a lamp with a lithophany of an image of Elvis and Michael Jackson, inside it has a LED strip that is connected to a USB to illuminate the lithophany, once turned on you can clearly see the image, I have used a LED strip of a single colour, but you can use the colour you want.
To attach the lid I used 8 magnets of 4x2mm.

To print the lithophany, I recommend to do it with a layer height of 0,12 mm and 4 walls, so that it is solid and no strange gaps are seen when illuminating it, the printing speed has to be slow, because it is a very narrow piece and if not, it will probably move.

On the other hand, for the structure I put a layer height of 0.2mm, 3 walls and with a filling of 8% is more than enough. I also used a plate with a texture that gave me some different patterns, but it's not necessary, it looks good either way ;).

I hope you like it and that it looks as good as it did to me.