Filament Box Drawer Hardware
Print Profile(1)
Description
I had so many empty boxes of filament from my NuBox membership and I didn't want to simply toss into recycling. Ended finding and printing an under desk drawer track. It worked well but I wanted to give the box a more finished look so I created this.
This set includes both a drawer face and a drawer handle/knob. The face measures 230mm x 90mm
If you print this please ensure you do not run the aux fan as it can likely cause warping
You will need to use a drop of cyanoacrylate glue to put together the knob with the threads as well as a few drops on the drawer face to prevent it from rotating. You will also need an exacto knife or something that will allow you to cut a small hole into your cardboard filament box. Align your filament box on your track and use the drawer face to trace around the hole. Then after placing a few drops of glue to the back of the drawer face use the assembled handle and hex nut to clamp the drawer face to the filament box.
I am using the following for the drawer system. I made a modified version for my drawer along with a side track to keep the drawer aligned.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)