Frenchfinity French Cleat Wall Anchor-18mm-Cleats

1000 thanks to Bastelsaal for inventing the FRENCHFINITY system!!!

“Unfortunately,” my existing French Cleat system in the workshop has a thickness of 18mm (so my installed wooden strips on the wall have a thickness of 18mm). As a result, the standard FRENCHFINITY cleats do not hold optimally, as they cannot slide all the way down.
Therefore, here is my remix; I simply cut off a section—problem solved!

Print settings:
0.28mm layer height
15% infill (Gyroid)

2 wall lines

Here is some more information about FrenchFinity:

What is Frenchfinity?

Frenchfinity seeks to address the lack of a standard for French Cleat holders, eliminating the need for constant rebuilding. The project strives for maximum user-friendliness, providing a simple plug-in system to minimize waste while offering unparalleled flexibility. Frenchfinity is the missing French Cleat subsystem.

Watch our first video for an overview: https://www.youtube.com/watch?v=pbA6Cf03Jpg

Visit our website: https://frenchfinity.xyz/