Search models, users, collections, and posts
Nozzle Wipper Improved V2 P1S P1P
IP Report
Print Profile(5)
0.2mm layer, 2 walls, 40% infill
Designer
25 min
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
23 min
1 plate
PETG mit PLA als Support 0.2mm layer, 2 walls, 40% infill
46 min
1 plate
0.12mm layer, 2 walls, 40% infill
38 min
1 plate
Click to see more
Open in Bambu Studio
Boost
388
1030
113
70
1.1 k
688
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
Based on the feedback from a few users I made this new version that have the support for the PTFE Tube on both sides. I honestly still use the older version and did not have any issues such as the one mentioned by some of the people who downloaded the file.
This new version required the following steps:
- Cut the PTFE tube at 7mm
- Insert the rod to the first hole and then insert the tube before pushing it all the way in until it settle in the second hole put one drip of superglue at the first hole so it will secure the rod in place. make sure the rod is in the second hole and all the way in before gluing.
- Install the A1 silicon nozzle wiper ( You can buy from Amazon or from the Makers supply ) I used super glue under the silicon wipe to hold it 100% in place.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (113)